Do it yourself
| ||||
|
Renault Clio - Video tutorial
Model: Renault Clio
Clio 3, MK 3, Clio III
- Years 2005-2013 In order to reset the Renault Clio Service warning light, you need to turn on the instrument panel and then press and hold the button located at the end of the lever to the right of the steering wheel. By holding this button down for a few seconds, the Service light will start flashing and the maintenance interval will be changed. When this has been reset, the Service light will go out and you will be able to release the button on the right lever. To verify that the reset was successful, the instrument panel must be switched off and on again.
Posted on 19 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |