|
Do it yourself
| |||
| ||||
How to Replace the Stabiliser Bar Links on a Renault Megane II
Model: Renault Megane
Megane 2
- Years:
2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
In this video, you can see how to replace the stabiliser bar links on a Renault Megane II: first, remove the front wheels and lift the vehicle. Clean the fixing elements of the stabiliser links with a wire brush and WD-40. Then, unscrew the fixing elements that connect the stabiliser link to the shock absorber strut, followed by the fixing elements that connect the stabiliser link to the bar itself. Remove the transverse stabiliser strut and inspect the stabiliser support bushes, replacing them if necessary. Next, install a new bar and tighten the fixing elements connecting the stabiliser link to the shock absorber strut, then tighten the fixing elements connecting the stabiliser bar to the bar. All joints should be treated with copper grease. Refit the wheels and lower the vehicle.
Updated on 30 September 2026 by ScegliAuto
Related tutorials
Renault Megane
(2008-2015 /
Megane 3, Megane III)
Today, follow these instructions to remove and replace the stabiliser bar links on the Renault Megane. First, raise the vehicle and remove the front …
Renault Megane
(2008-2015 /
Megane 3, Megane III)
Lift the front bonnet of the car and secure it. Locate the screws to remove. Unscrew the retaining bolts on the headlight bar using a socket or batte…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Spare Wheel on a Citroen C4 Grand Picasso
Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |