Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Stabiliser Bar Links on the Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

Today, follow these instructions to remove and replace the stabiliser bar links on the Renault Megane. First, raise the vehicle and remove the front wheel.

Using two spanners, loosen the bolts of the stabiliser bar links located both above and below, as shown in the video. Next, replace and install the new links, ensuring they are secured correctly, and check that the joints and supports are in good condition.

Similarly, replace the other front link.


Posted on 23 March 2026 by ScegliAuto


Related tutorials

How to Replace the Stabiliser Bar Links on a Renault Megane II
How to Replace the Stabiliser Bar Links on a Renault Megane II
Renault Megane (2002-2010 / Megane 2) In this video, you can see how to replace the stabiliser bar links on a Renault Megane II: first, remove the front wheels and lift the vehicle. Clean…
Replacement of the Handbrake Lever
Replacement of the Handbrake Lever
Renault Megane (2002-2010 / Megane 2) To replace the handbrake lever, you need to remove the cover of the central tunnel and part of the cover in the lower area of the console. Once all t…
Replacing the Front Headlight Bulb on a Renault Megane 4
Replacing the Front Headlight Bulb on a Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) In this tutorial, you will learn how to remove the front headlight bulb on a Renault Megane fourth series. The video demonstrates replacing an origin…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos