Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

If the service warning light is flashing on the instrument cluster display, it means it's time for maintenance due to either time elapsed or mileage reached; once regular maintenance has been performed, manually reset the service warning light using the button located beside the windscreen wiper lever; first, insert the card to enable the ignition, then press the button to scroll through the menu options until you reach the SERVICE INTERVAL option; at this point, press and hold to display the remaining interval, then press and hold again to reset the service.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
How to Reset the Service Light on a Renault Clio
How to Reset the Service Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To reset the service light on a Renault Clio, use the controls on the steering wheel or the right stalk, depending on the model. First, turn on the i…
How to Perform Service Reset on Renault Clio 4
How to Perform Service Reset on Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this brief video tutorial, see how to reset the maintenance light related to engine oil life on a fourth-generation Renault Clio, produced from 20…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos