Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform Service Reset on Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Warning light – error code

In this brief video tutorial, see how to reset the maintenance light related to engine oil life on a fourth-generation Renault Clio, produced from 2012 to 2019. First, turn on the vehicle's instrument panel without starting the engine. Then, press the top button at the end of the lever to the right of the steering wheel to scroll through the options on the information display of the speedometer until you reach the option for the next vehicle maintenance. Hold down the same button to start the reset and continue holding it until it is complete.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you can begin, sit in the driver's seat of your Renault Clio. Start by highlighting the phrase "Maintenance Range" on the multifunction displa…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you can start, sit in the driver's seat of your Renault Clio. Begin by highlighting the phrase "Maintenance Range" on the multifunction displa…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2019-2026 - What are the warning lights on the dashboard of the Clio 5? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer
    • Clio 2012-2019 - How can I retrieve the unlock code of the car radio of my Renault Clio? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos