Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Cabin air filter

To ensure that the air circulating in the Renault Clio's air conditioning system is always clean, we must replace the dedicated filter at the scheduled maintenance intervals. To do this, we open the hood of the engine compartment, release the gasket on the passenger side firewall, open the partition fixed by a clip and a rubber plug. In the center of the compartment, we will find the filter box cover that we will open after removing the locking screw. We remove the old filter element and insert the new filter by bending it slightly and respecting the direction of the flow. We close the cover by tightening the screw, put back the partition and the gasket.

Posted on 27 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Filter on a Renault Clio
How to Change the Cabin Filter on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing …
Replacement of the cabin air filter of the Renault Clio
Replacement of the cabin air filter of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The information provided in this guide will allow us to remove and replace the cabin air filter of the Renault Clio. First, we open the front door on…
How to Replace the Cabin Air Filter on a Renault Clio 5
How to Replace the Cabin Air Filter on a Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) Replacing the cabin air filter on a Renault Clio 5 is a simple and quick task to perform on your own. To carry out the replacement, get into the vehi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos