Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the clock lamp of the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Clock

When the lamp that illuminates the display of the clock in the center of the Renault Clio dashboard burns out, we must replace it. Equipped with a plastic lever, to avoid scratching the dashboard surfaces, we apply force to the edges of the clock frame until it comes off. We unscrew the two screws at the base of the panel to detach it and rotate it to access the back, disconnect the two connectors and then remove the burnt lamp. We insert a new lamp, reconnect the two connectors, place the panel back in its position and secure it with the screws. We put back the frame by pressing to fix it.

Posted on 28 June 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the dipped beam headlight of the Renault Clio 5
Replacement of the dipped beam headlight of the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) If the headlight bulb of the Renault Clio's dipped beam should burn out, we will promptly replace it for our safety. To do this, we open the hood of …
Replacement of the front headlight bulb of the Renault Clio 2
Replacement of the front headlight bulb of the Renault Clio 2
Renault Clio (1998-2005 / Clio 2, MK 2) In case the low beam headlight bulb of the Renault Clio needs to be replaced, let's see how to proceed. Open the hood of the engine compartment, posi…
How to set the clock on the Renault Clio 3
How to set the clock on the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today we will explain how to set the dashboard clock on a Renault model vehicle. Setting the time on the instrument panel of the Renault Clio mk3 mod…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos