Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb of the Renault Clio 2

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight bulb

See other generations:
Video tutorial

If the dipped beam bulb of the Renault Clio burns out, follow these steps for replacement. Open the bonnet of the engine compartment and position yourself in front of the headlight where the bulb needs to be changed.

The space behind the headlight is limited, so you will need to remove the headlight by unscrewing the three screws on the upper frame. Rotate the headlight upwards and remove the bulb cover; pull it out of its housing, disconnect the connector, and retrieve the adapter.

Take the new bulb, fit the adapter and connector, and insert it into its housing. Replace the cover and reassemble the headlight, securing it with the screws.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Removing Headlight Lights on Renault Clio
Removing Headlight Lights on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace blown bulbs in the Clio headlight, let's look at removing the front headlight. Open the front bonnet by pulling the lever located at the b…
How to Replace the Front Headlamp Bulbs on a Renault Clio
How to Replace the Front Headlamp Bulbs on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Learn how to replace the front headlamp bulbs on a Renault Clio. Open the bonnet (by pulling the lever located at the bottom right of the dashboard) …
Replace the Lights on Renault Clio 4
Replace the Lights on Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Want to replace the front headlamp bulbs? Here’s how to remove the bulbs from inside the front headlamp. Lift the front bonnet to access the headlamp…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos