Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Filter on the Renault Koleos MK2

Model: Renault Koleos MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

See other generations:
This video is currently unavailable

This video shows how to change the cabin filter on the Renault Koleos MK2: this filter is located on the passenger side, in the footwell. You need to move the panel on the side of the centre console, starting from the top, which is only clipped in and can be easily removed using a plastic trim tool.

The lower part is secured with a Torx screw; only after removing it can you pull it towards you. At this point, you can remove the panel at the front of the footwell (where a bulb is inserted, so take care). Finally, you can access the filter cover located at the junction between the front and side panels.

Remove the cover, extract the dirty filter, clean out dust and debris from the compartment, and place the new filter in position, ensuring the correct orientation. Now, simply reassemble everything in reverse order.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

Replacement of the cabin air filter of the Renault Koleos.
Replacement of the cabin air filter of the Renault Koleos.
Renault Koleos (2016-2024 / MK 2) These short and simple steps will allow us to replace the cabin air filter of the Renault Koleos. First, we open the front door on the driver's side …
How to Change the Cabin Filter on a Renault Koleos
How to Change the Cabin Filter on a Renault Koleos
Renault Koleos (2016-2024 / MK 2) In this video, we will see how to change the cabin air filter on a Renault Koleos. The filter is located on the driver's side, behind a panel situate…
How to Replace the Cabin Filter of a Renault Koleos
How to Replace the Cabin Filter of a Renault Koleos
Renault Koleos (2016-2024 / MK 2) To replace the cabin filter of a Renault Koleos, loosen the screws securing the protection panels of the centre tunnel on the side facing the passeng…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos