Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : How to replace the headlight bulb

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Headlight bulb
Operation: How to replace the headlight bulb

As a first operation, unhook the hood from the special lever and lift it, fixing it with the special rod to be able to disconnect the plugs from the battery, in this way you will protect any electronic devices, now with a socket wrench completely remove the battery, in this way you will have space suitable to remove the rear headphones of the headlight and disconnect the plugs from the bulbs to be able to replace them, after having made the necessary replacements you just need to retrace the steps described backwards to reassemble the various components, and that's it!


Posted on 30 September 2023 by ScegliAuto



How to replace the headlight bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, we will have to open the front hood of our Renault Scenic. So let's start by disengaging and removing the back cover of the burned o
How to replace the headlight bulb on the Renault Scenic?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) To be able to replace the headlight bulb on the Renault Scenic, you need to open the hood to access the rear part of the headlight which requires the
How to replace the headlight bulb of the Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see in this guide the steps on how to remove and replace the headlight bulb of the Renault Scenic, following the instructions below. First of a

Other guides that may interest you

    Frequently Asked Questions

    • Scenic 2009-2015 - How to replace the headlight bulb on the Renault Scenic 3? Read Answer
    • Scenic 2009-2015 - What bulbs is fitted to the headlight of the Renault Scenic x-mod? Read Answer
    • Scenic 2009-2015 - How much do the front bulbs of the Renault Scenic Xmod cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos