Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin fan of the Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Blower motor

In order to replace the cabin fan of the Renault Clio, you must open the glove compartment located on the passenger side: then you will have to unscrew the screws that fix it from the inside, removing the screws and fastening pins inside. In this way, you can also detach the dashboard panels around the compartment, so that they can be removed as well: at this point it will be possible to locate the cabin fan inside, so that it can be removed and replaced with a new one. Finally, you can reassemble the compartment together with the removed parts.

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Cabin Fan in the Renault Clio
Replacement of the Cabin Fan in the Renault Clio
Renault Clio (1990-1998 / Clio 1, MK 1) In this brief guide, we will go through the steps on how to remove and replace the cabin fan in the Renault Clio. First, open the car's bonnet and st…
Disassembly of the Renault Clio cabin fan
Disassembly of the Renault Clio cabin fan
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will see the main instructions on how to disassemble and replace the cabin fan of the Renault Clio. First of all, we get on board t…
Repair and Removal of Cabin Fan on Renault Clio 3
Repair and Removal of Cabin Fan on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, see how to repair the cabin fan of a Renault Clio third series. First, disconnect the two battery terminals; then access the inside of…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos