Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the MediaNav of Renault?

Model: Renault Renault Various
Part: Warning light – error code

In order to reset the Renault MediaNav, you need to connect a computer to the device so that you can locate the files stored in the memory. Here, you can remove the previously installed files in order to insert the new updated files. These files can be obtained directly from the official network website. Once the new files have been installed, you can disconnect the computer and reinstall the MediaNav. By doing this, you will notice that the reset is complete and everything is functioning properly.

Posted on 10 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the MediaNav of Renault?
How do you reset the MediaNav of Renault?
Renault Renault Various In order to reset the MediaNav of Renault vehicles, it is necessary to connect a computer directly to the MediaNav, so that it is possible to access …
How do you reset the Renault MediaNav?
How do you reset the Renault MediaNav?
Renault Renault Various On board the Renault, in order to reset the MediaNav, you will need to connect a computer to the device, so that you can find the files stored in the…
How do you reset the MediaNav in Renault cars?
How do you reset the MediaNav in Renault cars?
Renault Renault Various In order to reset the MediaNav of Renault, you will first need to turn on the dashboard by inserting the ignition key into the corresponding slot. On…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos