Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 2016 Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

In this guide, you will learn the steps to correctly perform a manual reset of the service light on your 2016 Renault Master. First, insert the key and start the dashboard, then locate the two buttons at the end of the right steering lever and press the lower button several times.

As soon as you see the vehicle maintenance screen on the dashboard display, press and hold the same button used earlier until the display stops flashing. Finally, release the button, and you are done.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Master?
How to Reset the Service Light on a Renault Master?
Renault Master (2010-2023 / MK 3) To reset the Service light on a Renault Master, turn the ignition on by rotating the key in the ignition switch. Once the dashboard is lit, scroll th…
How to Reset the Service Light on a Renault Master
How to Reset the Service Light on a Renault Master
Renault Master (2010-2023 / MK 3) To reset the service light on a Renault Master vehicle, follow these steps: Start the car and ensure the display shows the total mileage. Press and h…
How to reset the service light on the Renault Master
How to reset the service light on the Renault Master
Renault Master (2010-2023 / MK 3) If you have a Renault Master and want to manually reset the service light, all you have to do is follow the steps described in the following guide. F…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos