Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the central display of the Renault Zoe?

Model: Renault Zoe MK 1 - Years 2013-2024
Part: Checks and maintenance

In order to replace the central display of the Renault Zoe, you need to use a tool to pry off the panel located at the back of the device, so that you can access the screws underneath: these two screws must be completely removed in order to free the screen from the top. The lower button panel must also be removed and the screws behind it can be loosened: this way the screen can be freed by disconnecting the connectors. The new one can then be connected and secured with the screws that were just removed.

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Components of the Centre Console on the Renault Zoe
How to Remove the Components of the Centre Console on the Renault Zoe
Renault Zoe (2013-2024 / MK 1) This guide outlines the steps that will allow you to remove the components of the centre console of the dashboard, primarily the display and the clim…
Where are the fuses located in the Renault Zoe?
Where are the fuses located in the Renault Zoe?
Renault Zoe (2013-2024 / MK 1) The fuses of the Renault Zoe are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, it will be pos…
How to Reset the Service Light on a Renault Zoe
How to Reset the Service Light on a Renault Zoe
Renault Zoe (2013-2024 / MK 1) Today, you will set the maintenance light on a Renault Zoe vehicle. The maintenance light indicates that a service is required. Once all service oper…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos