Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Twingo
    4. : Crankshaft RPM sensor

Renault Twingo - Crankshaft RPM sensor

Renault Twingo (1993-2007 / Twingo1)
Shaft sensor replacement on Renault Twingo
The PMS top dead center sensor informs the control unit of the piston position and therefore of the crankshaft rotation speed. Lift the hood and put on the …read all…
Posted on 21 January 2024 by ScegliAuto
Renault Twingo (1993-2007 / Twingo1)
How to remove the speed sensor in a Renault Twingo
This video explains us how to remove the speed sensor in a Renault Clio. In this case it is a Renault car, but the procedure is similar for many other car …read all…
Posted on 30 December 2023 by ScegliAuto
Airbags (6) Loudspeaker (3) Shock absorbers (3) Car stereo (10) Battery (6) Air Vents (1) Arm (1) Spark plugs (3) Key (4) Timing belt (3) V-belt (1) Air conditioning controls (3) -board computer (4) Checks and maintenance (56) Dashboard (1) Rear bench seat (1) Headlight (5) Tail light (1) Particulate filter (1) Air filter (10) Cabin air filter (8) Petrol filter (5) Grille (1) Accessory Kit (1) Light bulb (2) Headlight bulb (9) Rear light bulb (2) Interior lights ceiling light bulb (1) Dashboard light (2) Engine (1) Window motor (1) Starter motor (2) Engine oil (5) Door panel (4) Front bumper (1) Rear bumper (2) Hydraulic pistons (1) Tires (4) Gear Shift Knob (1) Fuel pump (2) Door (1) Window lift button (1) Instrument cluster (12) Wheel (1) Fuse box (24) Seat (6) Crankshaft RPM sensor (2) Lock (1) Lambda sensor (1) Outside rearview mirror (4) Drums and shoes (1) Windscreen wipers (5) Valve (1) Interior blower (7) Side window (1) Steering wheel (3)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos