Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speed Sensor on a Renault Twingo

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Crankshaft position sensor

This video explains how to remove the speed sensor on a Renault Clio. Although this is a Renault vehicle, the procedure is similar for many other makes and models. After opening the bonnet, locate the position of the sensor, which is found on the top of the gearbox near the clutch inspection window. Once located, use an Allen key to undo and remove the screws holding it in place. You can then easily remove the old speed sensor by sliding it out of its mount.

Updated on 31 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the sensor on a Renault Twingo
Replacing the sensor on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) The top dead centre (TDC) sensor informs the ECU of the piston position and thus the crankshaft rotation speed. Lift the bonnet and insert the suppor…
Removal of the speedometer from the dashboard of the Renault Twingo II.
Removal of the speedometer from the dashboard of the Renault Twingo II.
Renault Twingo (2007-2014 / Twingo 2) In this video we see how to remove the fluttering speedometer from the dashboard of the Renault Twingo II: first we remove the upper cover, which is …
How to remove the speedometer from a Renault Twingo Mk2?
How to remove the speedometer from a Renault Twingo Mk2?
Renault Twingo (2007-2014 / Twingo 2) If you want to replace the speedometer on your Renault Twingo Mk2, follow the steps shown in this video to see how simple it is to do it yourself. Fi…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos