How to Replace the Clutch on the Renault Megane II 1.5 dCi

In this video, you will see how to change the clutch on a Renault Megane II 1.5 dCi: lift the car, disconnect the battery, and remove the engine support bracket. Then, dismantle any obstructing components, such as the front headlights, the drive shafts (which must be extracted from the differential), the clutch cable, and the hydraulic actuator; the engine mount and the gearbox (to ensure correct alignment). Remove the gearbox, supporting the engine with a jack to prevent sagging; unscrew the gearbox bolts (be careful, this is a very heavy component), and then pull the gearbox back to disengage it from the engine (this may require an assistant). Now, replace the clutch by gradually unscrewing the cross bolts in a diagonal sequence; remove the clutch disc and the release bearing; clean any grease or dust from the flywheel and the primary shaft. Now, fit the new clutch, using a centring tool to align the clutch disc, and tighten the bolts to the specified torque of 25Nm. Now you can reattach the gearbox, reinserting the primary shaft into the clutch disc: this is a tricky operation, you may need to slightly rotate the disc to align it. Now bring the gearbox close to the engine and tighten the bolts; reconnect all components: drive shafts, clutch actuator, and supports. Finally, perform the final checks, adjusting the clutch pedal (if hydraulic, check the fluid level) and conduct a functionality test by pressing the clutch and ensuring the gear engages without resistance.