|
Do it yourself
| |||
| ||||
How do you replace the clutch in a Renault Scenic 1.5L Diesel 2010?
Model: Renault Scenic
Scenic 3, MK 3, MK III, Scenic III
- Years 2009-2015
I have to be honest, replacing the clutch on a 2010 Renault Scenic 1.5L Diesel is a tough job but doable with a bit of patience and the right tools. First things first: disconnect the battery, lift the car safely, and remove the front wheels and half shafts. Remove the gearbox housing - yes, it's heavy, get help if you can. Now you can access the clutch: unscrew the disc and pressure plate from the flywheel. Install the new kit, making sure to center the disc properly with a special tool (or a DIY trick like a socket or plastic tube). Reassemble everything in reverse, double-checking the bolts, and be careful not to forget the new gearbox oil. Finally, test the clutch: if it engages properly, you've done it right. And you've also saved yourself quite a bit from the mechanic. If you don't feel comfortable doing it yourself, then contact a specialized workshop.
Posted on 10 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Scenic
(2003-2009 /
MK 2, Scenic 2)
Let’s see how to bleed the clutch pump of a Renault Scenic, following these simple and important instructions. First, connect your hose to the bleed …
Renault Scenic
(2009-2015 /
Scenic 3, MK 3, MK III, Scenic III)
Today we will discover the instructions that will allow us to disassemble and replace the diesel filter of the Renault Megane 1.5 dCi. First, we remo…
Renault Scenic
(2009-2015 /
Scenic 3, MK 3, MK III, Scenic III)
The battery of a car equipped with a start and stop device, as in the case of the Renault Scenic 3, is replaced in exactly the same way as traditiona…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.858
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |