Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oxygen Sensor of the Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Oxygen sensor

See other generations:
Video tutorial

In this video tutorial, learn how to remove and replace the lambda sensor or oxygen sensor of the petrol Renault Twingo. First, lift the vehicle and locate the lambda sensor on the exhaust manifold; then disconnect its electrical connector and use a socket spanner to unscrew the sensor bulb for removal.

Now replace the lambda sensor with the new one, using the original part; screw it in by hand onto the exhaust manifold and then tighten with a spanner, following the video tutorial to the end!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on the Renault Twingo?
How to replace the starter motor on the Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To replace the starter motor on the Renault Twingo, open the bonnet to access the components located inside the engine compartment: here you will fin…
Where Are the Fuses in the Renault Twingo?
Where Are the Fuses in the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) The fuse boxes in the Renault Twingo contain the fuses that control the operation of the devices installed in the car: this type of vehicle has a sin…
How to Replace the Battery in a Renault Twingo
How to Replace the Battery in a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To replace the battery in a Renault Twingo, open the bonnet to access the components in the engine bay. On the left side, locate the battery, connect…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos