Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Roewe
    3. : Roewe Various

How to replace the front wipers on the Roewe Rx3

Model: Roewe Roewe Various
Part: Windshield wipers

In this short and simple guide we will see the step by step instructions to remove and replace the front wipers of the Roewe Rx3. First, let's move to the front of the car and start raising the wiper arm; then we go to press the button that we find on our windshield wiper, in order to unhook the clip and remove it, as shown in the video. At this point we are going to install the new front wiper, hooking it perfectly onto the wiper arm; we replace, in the same way, the other front and rear wiper!

Posted on 4 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the speakers of the MG - Roewe Rx5
How to replace the speakers of the MG - Roewe Rx5
Roewe Rx5 (2016-2023 / MK 1) Let's find out the main instructions that will allow us to disassemble and replace the original speakers of the Mg Rx5, but also of the Roewe. First …
What are the characteristics of the Roewe 350
What are the characteristics of the Roewe 350
Roewe 350 (2010-2015 / Ap11) The Roewe 350 is a small notchback car produced in China by Roewe from 2010 to 2015, which was sold in international markets with a 1.5 146 hp engine…
How to recharge the battery of the Roewe Rx5
How to recharge the battery of the Roewe Rx5
Roewe Rx5 (2019-2026 / ) In this video tutorial we will see how to recharge the battery of the Roewe Rx5, following these simple and quick steps. First of all, let's place th…

How to Replace the Interior Light Bulbs on a Jeep Renegade

Let’s see how to replace the damaged bulbs in the interior light of a Jeep Renegade. Use a screwdriver to pry between the interior light and the headlining panel (without breaking the panel), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the interior light into its housing (push the clear plastic with your hands until the clips are fully engaged in the side plastic). Test the correct operation of the bulbs in the interior light after installation.

Watch the video!


by ScegliAuto

More videos