Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the Roewe RX5 wiper blades?

Model: Roewe Rx5 - Years 2019-2026
Part: Windshield wipers

In order to replace the Roewe RX5 wiper blades, you need to lift the arms of the blades, so that they are not in contact with the windshield. Once the brushes have therefore been lifted, it will be necessary to release the pins which fix the brush to the relative arm, so that it can be removed by pulling it downwards. Once the old brush has therefore been removed, it will be possible to insert the new one in the final part of the arm. When the same operation has been performed for the other arm as well, it will be possible to position the blades on the windscreen, checking that everything works correctly.

Posted on 27 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the MG RX5 - Roewe RX5
How to reset the tire pressure warning light on the MG RX5 - Roewe RX5
Roewe Rx5 (2019-2026 / ) In this guide, let's see the main steps that will allow us to reset the tire pressure warning light on the Roewe RX5 and MG RX5; before carrying out …
How to recharge the battery of the Roewe Rx5
How to recharge the battery of the Roewe Rx5
Roewe Rx5 (2019-2026 / ) In this video tutorial we will see how to recharge the battery of the Roewe Rx5, following these simple and quick steps. First of all, let's place th…
Installation of rear steel silencers on a Roewe RX5
Installation of rear steel silencers on a Roewe RX5
Roewe Rx5 (2019-2026 / ) How to install the steel finished rear silencers on the Roewe RX5. Our Youtuber bought them from an e-commerce platform. There are both black (35.90 …

How to Replace the Diesel Filter on a Dacia Duster

Let's see how to replace the diesel filter on a Dacia Duster. Start by removing the plastic cover at the bottom of the bumper with a suitable screwdriver (remove the circle), then reach the front headlamp located in the bumper (as shown in the video). After removing the container, take out the filter inside and fit a new one (same size). Refit the container and the plastic cover under the car's bumper with the attached clips. Test the proper functioning. Refit the front circle with the securing clips and lower the car.

Watch the video!


by ScegliAuto

More videos