Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exterior mirror mirror on Saab 9 3

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Side mirror

Let's see how to replace the mirror of the exterior mirror on Saab 9 3. With a lever with a plastic or rubber coating, we go to pry between the perimeter of the mirror frame and the mirror glass of the same. We lever until the mirror detaches from the mirror (disconnect the power cable if present); very delicate operation because the slide or the mirror itself could break. We replace the damaged piece with a new one (same size and model). We are careful to engage the plastic snap clips in the mirror supports.

Posted on 22 November 2019 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on Saab 93
How to Replace the External Wing Mirror on Saab 93
Saab 9 3 (2002-2014 / MK 2) In this video, see how to proceed with the removal of the external wing mirror on a Saab 93. Using a plastic or rubber lever, pry between the perimet…
Replace mirror on Saab 0 3
Replace mirror on Saab 0 3
Saab 9 3 (2002-2014 / MK 2) Replacing the mirror of a Saab 9 3, let's see how it changes. With a plastic lever, we go to pry between the perimeter of the mirror frame and the mi…
Glass replacement on Saab 9-3 mirror
Glass replacement on Saab 9-3 mirror
Saab 9 3 (2002-2014 / MK 2) Rotate the mirror hood so that the outside is facing the hood, then rotate the mirror glass in the same direction using the electronic controls insid…

How to Adjust the Handbrake on VW Polo

If pulling the handbrake lever results in a long travel distance, significantly exceeding the usual 4 to 5 clicks, it means you need to adjust the travel to compensate for cable slack and wear on the shoes. This is a manual operation carried out using the adjustment nuts located at the base of the handbrake lever. Release and lift the plastic cover at the base of the lever to access the cables (one for each shoe) and their respective adjusters. First, loosen the lock nut and tighten the nut to pull the cable until the lever achieves a travel of 4 to 5 clicks.

Watch the video!


by ScegliAuto

More videos