Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Hood Motor of the Saab 900S

Model: Saab 900 MK 2 - Years 1993-1998

This guide outlines the main instructions for removing and replacing or repairing the hood motor of the Saab 900. First, open the rear hatch of the boot and begin removing the trim on the right side of the boot space to access the hood motor; then use a spanner or Torx screwdriver to unscrew its screws, disconnecting the power connector and the steel cable to remove the motor, as shown in the video. At this point, carry out the repair or directly replace the part!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Dismantling Saab 900 Hood
Instructions for Dismantling Saab 900 Hood
Saab 900 (1993-1998 / MK 2) Once the hood is fully opened, start by removing the trim that secures the rear of the cover: this is a strip that covers the entire edge of the hood…
Removing Brake Pads on Saab 900
Removing Brake Pads on Saab 900
Saab 900 (1993-1998 / MK 2) Replace the front brake pads on a Saab 900. Lift the car using a jack to the desired height, then remove the wheel with the respective bolts. Unscrew…
Disassembly and reassembly of the bumper on the Saab 900 DIY
Disassembly and reassembly of the bumper on the Saab 900 DIY
Saab 900 (1993-1998 / MK 2) The procedure involves the removal of the bumper from the Saab 900 with the vehicle secured and the ignition off. It starts by identifying the visibl…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos