Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Saab 9-3

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Spark plugs

Release the bonnet from the appropriate lever and lift it. Now you will need access to the area beneath the upper engine cover, so remove it by unscrewing the bolt that secures it. After removing it, you will have access to the coils where the spark plug is located for each coil. Unscrew the bolts that secure each individual coil and extract it; this will allow you to remove the spark plug from the tip of the coil. Now, all you need to do is position the new spark plugs and retrace your steps to reassemble the various components.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the spark plugs on the Saab Nine-Three?
How do you replace the spark plugs on the Saab Nine-Three?
Saab 9 3 (2002-2014 / MK 2) To be able to replace the spark plugs on the Saab 9-3, you have to open the hood and remove the plastic cover from the top of the engine. With a torx…
Instructions for Replacing Spark Plugs
Instructions for Replacing Spark Plugs
Saab 9 3 (2002-2014 / MK 2) After opening the front engine bonnet, ensure it remains securely open. It is advisable to carry out this operation with the engine cold to avoid unp…
How to disassemble the car radio of a SAAB 9 3
How to disassemble the car radio of a SAAB 9 3
Saab 9 3 (2002-2014 / MK 2) Before we are able to start, we will have to go and sit in the driver's seat of our SAAB 9-3. So let's start by disengaging and removing the air vent…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos