Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Serpentine Belt on the Samsung SM5

Model: Samsung Sm5 A34r - Years 2005-2010
Part: V-belt

This guide provides instructions on how to remove and replace the serpentine belt and the auxiliary belt on the Samsung SM5. First, raise the vehicle and remove the right front wheel; then remove the clips and unscrew the bolts of the wheel well cover to access the belt and pulleys, as shown in the video. Next, unscrew the tensioner bolt to remove the old belt and replace it with the new one (using the original part); insert the new belt in the correct direction and re-tighten the tensioner, following the video until the end!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Samsung Sm5 (2010-2019 / L43) In today's tutorial video, you will learn how to disassemble and replace the battery of the Samsung SM5 by following the instructions below. First, o…
Samsung Sm5 (2005-2010 / A34r) In this guide, we will see the instructions on how to remove and replace the xenon headlight bulbs of the Samsung SM5. First, move to the side of the…
Samsung Sm5 (2010-2019 / L43) Below are the instructions that will allow you to remove and replace the cabin air filter on a Samsung SM5. First, get inside the vehicle and start b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos