Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs on the Samsung QM5?

Model: Samsung Qm5 H45 - Years 2007-2016
Part: Tail light bulb

As seen in this tutorial, replacing the rear headlight bulbs on the Samsung QM5 is an extremely simple and quick task. Before proceeding, ensure the key is not in the ignition for safety. Start by opening the trunk, then remove the two mounting bolts of the light assembly using a 6mm socket wrench. Once done, pull the assembly towards you to separate it from the tailgate, grasp the bulb you intend to replace, and extract it from the housing by turning it slightly counterclockwise. Finally, insert the replacement bulb, avoiding direct contact with the glass using bare hands.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight on a Samsung QM5
Samsung Qm5 (2007-2016 / H45) As seen in the video, to completely replace a rear headlight on your Samsung QM5, start by removing it. Take off the bolt covers and unscrew them wit…
How to Replace the Battery in the Samsung QM5 Remote?
Samsung Qm5 (2007-2016 / H45) In this tutorial, you will learn how to replace the dead battery in the Samsung QM5 remote, a very simple and quick operation. For this, you will onl…
How to Replace the Cabin Filter in the Samsung QM5?
How to Replace the Cabin Filter in the Samsung QM5?
Samsung Qm5 (2007-2016 / H45) In this tutorial, you will see how to replace the cabin filter in the Samsung QM5, a very simple and quick operation. It is located under the dashboa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos