Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulbs in the Samsung Sm3?

Model: Samsung Sm3 L38 - Years 2009-2020
Part: Light bulb

Through this video, you can learn how to change the headlight bulbs in the Samsung Sm3, but it is also useful for learning how to replace the headlight since it is necessary to remove it. In the first part of the video, you can see where the screws and bolts are to be removed. Once these are taken out, grasp the headlamp and pull it outward from the car while disconnecting the connectors. Place the headlight on a flat surface, remove the protective caps from the bulbs, and replace them. Finally, reassemble everything by following the procedure in reverse.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs in a Samsung SM3?
How to Replace the Rear Headlight Bulbs in a Samsung SM3?
Samsung Sm3 (2009-2020 / L38) Replacing the rear headlight bulbs in a Samsung SM3 is a very simple and quick task. First, ensure the key is not in the ignition for safety. Then, o…
How to Change the Low Beam Headlight Bulb on a Samsung SM3
How to Change the Low Beam Headlight Bulb on a Samsung SM3
Samsung Sm3 (2009-2020 / L38) Let's see how to change the position light on the Samsung SM3. It's really simple because the headlight assembly is held on by just three screws. Onc…
How to Change the Spark Plugs on a Samsung SM3
How to Change the Spark Plugs on a Samsung SM3
Samsung Sm3 (2009-2020 / L38) Discover in this guide how to remove and replace the engine spark plugs on the Samsung SM3, following the instructions below. First, open the hood an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos