Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Samsung
  4. :
  5. Sm3
  6. : How to change the low beam bulb on the Samsung SM3

Samsung Sm3 - Video tutorial

Model: Samsung Sm3 L38 - Years 2009-2020
Part: Light bulb
Operation: How to change the low beam bulb on the Samsung SM3

Let's see how to change the position light on the Samsung SM3. It is really very simple because the headlight assembly is only held up by three screws. Once the three screws in the optical unit have been removed, it can be gently pulled towards you. The sidelight is quellas at the far end of the headlight, and is easily removed because it has a protrusion that can be pulled out easily. Remember to always handle the new bulb with rubber gloves so as not to damage it, otherwise it will shed less light than you expect. Replace it and then put the light assembly back in its place. Re-tighten the three screws and the job is finished.


Posted on 22 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos