Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Spark Plugs on a Samsung SM3

Model: Samsung Sm3 L38 - Years 2009-2020
Part: Spark plugs

Discover in this guide how to remove and replace the engine spark plugs on the Samsung SM3, following the instructions below. First, open the hood and start disconnecting the spark plug wires; to do this, remove the screws on the connectors using a socket wrench, as shown in the video. Now use a socket wrench with an extension to unscrew all four spark plugs; replace them with new ones that have the same thread pitch and heat rating, hand-tightening them before tightening with a wrench (preferably a torque wrench).

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the spark plugs of the Samsung SM3
Replacement of the spark plugs of the Samsung SM3
Samsung Sm3 (2009-2020 / L38) Today's video will show us how to disassemble and replace the spark plugs of the Samsung SM3 engine. First, we open the car's engine hood and start r…
How to Replace the Cabin Air Filter in a Samsung SM3?
How to Replace the Cabin Air Filter in a Samsung SM3?
Samsung Sm3 (2009-2020 / L38) In this tutorial, you will see how to replace the cabin air filter in a Samsung SM3, a very simple operation. First, sit in the passenger seat, then …
How to Change the Headlight Bulbs in the Samsung Sm3?
How to Change the Headlight Bulbs in the Samsung Sm3?
Samsung Sm3 (2009-2020 / L38) Through this video, you can learn how to change the headlight bulbs in the Samsung Sm3, but it is also useful for learning how to replace the headlig…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos