Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the spark plugs of the Samsung SM3

Model: Samsung Sm3 L38 - Years 2009-2020
Part: Spark plugs

Today's video will show us how to disassemble and replace the spark plugs of the Samsung SM3 engine. First, we open the car's engine hood and start removing the spark plug coils found at the top; then we use a socket wrench with an extension to unscrew and remove the spark plugs, as shown in the video. At this point, we install the new spark plugs, of the correct type and with the same pitch; we screw the spark plugs back in by hand and then gently tighten with a wrench, finally reassembling the coils, following the video until the end!

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Spark Plugs on a Samsung SM3
How to Change the Spark Plugs on a Samsung SM3
Samsung Sm3 (2009-2020 / L38) Discover in this guide how to remove and replace the engine spark plugs on the Samsung SM3, following the instructions below. First, open the hood an…
Replacement of the cabin air filter of the Samsung SM3.
Replacement of the cabin air filter of the Samsung SM3.
Samsung Sm3 (2009-2020 / L38) Today's instructions will show us how to disassemble and replace the cabin air filter of the Samsung SM3, in simple and quick steps. First, we get on…
How to Replace the Rear Headlight Bulbs in a Samsung SM3?
How to Replace the Rear Headlight Bulbs in a Samsung SM3?
Samsung Sm3 (2009-2020 / L38) Replacing the rear headlight bulbs in a Samsung SM3 is a very simple and quick task. First, ensure the key is not in the ignition for safety. Then, o…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos