Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Samsung
  4. :
  5. Sm3
  6. : How to replace the rear light bulbs in the Samsung SM3?

Samsung Sm3 - Video tutorial

Model: Samsung Sm3 L38 - Years 2009-2020
Part: Rear light bulb
Operation: How to replace the rear light bulbs in the Samsung SM3?

Replacing the rear light bulbs in the Samsung SM3 is a very simple and quick operation, let's see how to proceed in this tutorial. First of all, make sure the key is not inserted to operate in complete safety, then open the trunk door and, with a cross-tip screwdriver, unscrew the two fixing screws of the taillight. Once this is done, grab the headlight, pull it towards you and remove it from the bodywork. At this point, we can disconnect the power connector, release the internal base, and proceed with the replacement of the faulty bulb.


Posted on 29 June 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos