Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Samsung SM3?

Model: Samsung Sm3 L38 - Years 2009-2020
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin air filter in a Samsung SM3, a very simple operation. First, sit in the passenger seat, then go under the dashboard and remove the panel located at the junction between the center console and the dashboard. Next, locate the long rectangular cover, unscrew the corresponding screw with a Torx wrench, and open it. At this point, you can pull out the old filter and insert the replacement, making sure to respect the orientation, which is usually indicated on the edge.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Spark Plugs on a Samsung SM3
How to Change the Spark Plugs on a Samsung SM3
Samsung Sm3 (2009-2020 / L38) Discover in this guide how to remove and replace the engine spark plugs on the Samsung SM3, following the instructions below. First, open the hood an…
How to Change the Headlight Bulbs in the Samsung Sm3?
How to Change the Headlight Bulbs in the Samsung Sm3?
Samsung Sm3 (2009-2020 / L38) Through this video, you can learn how to change the headlight bulbs in the Samsung Sm3, but it is also useful for learning how to replace the headlig…
How to Replace the Rear Headlight Bulbs in a Samsung SM3?
How to Replace the Rear Headlight Bulbs in a Samsung SM3?
Samsung Sm3 (2009-2020 / L38) Replacing the rear headlight bulbs in a Samsung SM3 is a very simple and quick task. First, ensure the key is not in the ignition for safety. Then, o…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos