Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Panels of the Samsung SM7 with Ambient Light Type

Model: Samsung Sm7 L47 - Years 2011-2019

Replacing the door panels of the Samsung SM7 with the ambient light type is straightforward. Simply remove two screws, take off the existing panel using plastic trim tools to avoid damage, and connect the new panel to the existing electrical connector, which provides soft, effective lighting. Unfortunately, the challenge lies in sourcing the parts, as the door panels—featuring a curtain that can be pulled up from the bottom—are currently unavailable on AliExpress, despite still being listed in the catalog. For this reason, no price is provided. The YouTuber does not offer further information on who might manufacture this accessory.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery of the Samsung SM7
Samsung Sm7 (2004-2011 / EX2) In this short and simple guide, see how to disassemble and replace the battery of the Samsung SM7. First, open the hood of your car and start unscrew…
How to Replace the Cabin Air Filter on a Samsung SM7?
How to Replace the Cabin Air Filter on a Samsung SM7?
Samsung Sm7 (2011-2019 / L47) To replace the cabin air filter on a Samsung SM7, unscrew the screws that secure the left side panel of the passenger footwell so that it can be remo…
How to Replace the Outside Rearview Mirror on a Samsung SM7?
How to Replace the Outside Rearview Mirror on a Samsung SM7?
Samsung Sm7 (2011-2019 / L47) To replace the door panel on a Samsung SM7, first remove the corresponding door panel. To do this, unscrew the fastening screws located at the bottom…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos