Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Altea
    4. : Tail light bulb

Seat Altea - Tail light bulb

Tail Light Bulb Seat Altea (2004-2015 / mk 1)

Seat Altea (2004-2015 / MK 1)
Replacement of the third brake light bulbs of the Seat Altea XL.
In this video tutorial, we will see how to disassemble and replace the brake light bulb of the third stop of the Seat Altea, in simple steps. First, we open …Read all…
Posted on 31 January 2025 by ScegliAuto
Seat Altea (2004-2015 / MK 1)
Replacing the Bulb of the Rear Light on the Seat Altea
Here are the useful steps to remove and replace the bulb of the rear light on the Seat Altea. First, open the boot lid and begin unscrewing the fixing screws …Read all…
Posted on 24 August 2026 by ScegliAuto
Seat Altea (2004-2015 / MK 1)
How to Replace the Rear Brake Light Bulb on a SEAT Altea XL
Before you start, open the boot lid. Once open, you will notice a snap-on cover on the left side of the boot, which you will remove. After removing the cover, …Read all…
Posted on 30 May 2026 by ScegliAuto
Seat Altea (2004-2015 / MK 1)
Replacement of Rear Light Bulb and Removal of Light Unit
Open the boot, locate the square-shaped cap on the side trim, and remove it: inside you will see the plastic nut securing the light unit; unscrew the nut and …Read all…
Posted on 5 February 2026 by ScegliAuto
Airbag (1) Car stereo (9) Control unit (1) Key (2) Trunk lock (1) Onboard computer (1) Checks and maintenance (3) Dashboard (1) Headlight (2) Tail light (5) Fog lights (3) Air filter (2) Cabin air filter (5) Fuel filter (1) Fuel injectors (1) Headlight bulb (5) Tail light bulb (4) Interior dome light bulb (1) License plate light (2) Clock (1) Door trim panel (10) Front bumper (2) Brake pads (2) Hydraulic pistons (1) Shift knob (1) Fuel pump (1) Car door (1) Power window switch (1) Instrument cluster (1) Fuse box (35) Door lock (2) Warning light – error code (5) (1) Tire pressure warning light (2) Service warning light (30) Windshield wipers (3) Thermostat (1) Blower motor (3) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos