Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light in a Seat Leon?

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

Resetting the tyre warning light in a Seat Leon, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure you have restored the correct pressure in each tyre following the instructions in the manual.

Start by going inside the cabin, then insert the key and turn on the instrument panel. Next, press the "CAR" button located to the right of the central display, enter the "CAR" section, and select "TYRES". At this point, simply perform the reset using the "CALIBRATE" option and restart the vehicle.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Seat Leon
How to Reset the Tyre Pressure Warning Light on a Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) Below are the main instructions to reset the tyre pressure warning light on a Seat Leon in simple and quick steps; before performing the reset, ensur…
How to Reset the Tyre Warning Light on a 2016 Seat Leon
How to Reset the Tyre Warning Light on a 2016 Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) If the tyre warning light on the instrument cluster of your 2016 Seat Leon keeps appearing despite no punctures or loss of pressure, follow these ste…
Reset the tire pressure warning of the Seat Leon.
Reset the tire pressure warning of the Seat Leon.
Seat Leon (2012-2019 / 5F, MK 3) These short and simple steps will allow us to reset the tire pressure warning light of the Seat Leon; before resetting the TPMS sensors, it is necess…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos