Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Seat Ibiza?

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will see how to replace the cabin filter in the Seat Ibiza, a very simple and quick operation. First, go to the passenger side, then position yourself under the dashboard, locate the long rectangular cover and open it by unlocking the relevant clips.

Next, remove the old filter, clean the inside of the housing from any dirt residue, and insert the replacement filter ensuring it is oriented correctly. Finally, close the cover and secure the two clips.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter in the Seat Ibiza
Replacing the Cabin Air Filter in the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) The following steps will show you how to remove and replace the cabin air filter in the Seat Ibiza, following the instructions below. First, open the…
How to replace the cabin filter on the Seat Ibiza
How to replace the cabin filter on the Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To replace the cabin filter on the Seat Ibiza, start by going under the dashboard (behind the glove compartment), where there is a rectangular cover.…
How to Replace the Cabin Air Filter on a Seat Ibiza?
How to Replace the Cabin Air Filter on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) To replace the cabin air filter on a Seat Ibiza, open the passenger side glove compartment. Unscrew or unclip the screws/latches securing the compart…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos