Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the 2024 Seat Ateca located?

Model: Seat Ateca MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Fuse box

Video tutorial

In this new guide dedicated to all of you who own the new Seat Ateca, we will find out where the main fuse box is located so that you can intervene in a targeted and safe manner in case of electrical problems. First of all, remember to park the car on a flat road and turn it off completely.

Once you have done this, enter your Seat Ateca from the driver's side and remove the plastic panel located at the bottom of the dashboard. Finally, locate the fuses located under the panel in question and you are done.


Posted on 16 November 2024 by ScegliAuto


Related tutorials

Where to Find the Fuses in the Seat Ateca
Where to Find the Fuses in the Seat Ateca
Seat Ateca (2016-2025 / MK 1) If you own a Seat Ateca and are wondering where the fuse box is located, read this guide to find it quickly and independently. First, reach the drive…
Where to Find the Engine Fuse Box in the Seat Ateca 2024
Where to Find the Engine Fuse Box in the Seat Ateca 2024
Seat Ateca (2016-2025 / MK 1) To locate the engine fuse box in your Seat Ateca (2024 model), follow all the steps described below. First, ensure the car is turned off and check th…
Where are the fuses of the Seat Ateca located?
Where are the fuses of the Seat Ateca located?
Seat Ateca (2016-2025 / MK 1) The fuse boxes of the Seat Ateca are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: in thi…

Other guides you may be interested in

How to Replace the Internal Door Handle on the Opel Corsa D

Replacing the internal door handle on the Opel Corsa D is a relatively simple task you can do yourself, especially with the help of our video tutorial. Open the affected door and begin removing the panel. Use a Torx key to undo the screw located behind the handle and the locking handle. Detach the panel and disconnect the connector. Place the panel on a flat surface and remove the handle. With a screwdriver, undo the small screw on the handle mechanism and then remove everything. Insert the new handle and fit the mechanism. Once tested for functionality, reattach the panel to the door.

Watch the video!


by ScegliAuto

More videos