Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Ibiza?

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

By holding down the button marked "0.0/SET" located in the centre of the dashboard, you can clear the Service light on the Seat Ibiza. While holding the button, turn the key to switch on the instrument cluster: at this point, the menu will start to scroll.

Release the button when the message "Reset inspection service?" appears. After releasing the button, press it again until the message "Service reset" appears.

At this point, turn off the cluster by removing the key to complete the procedure.


Posted on 11 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Seat Ibiza?
How to Reset the Service Light on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To reset the Service light on a Seat Ibiza, press and hold the button located on the central right side of the instrument cluster while it is off. Co…
How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…
How to Reset the Service Light on a Seat Ibiza?
How to Reset the Service Light on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To reset the Service light on a Seat Ibiza, press and hold the button located at the bottom centre of the instrument panel while it is off. Continue …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos