Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Inspection Light on a 2014 Seat Ibiza

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Service warning light

To manually reset the inspection (or service) light on your 2014 Seat Ibiza, simply follow this procedure. First, reach the driver's seat inside the cabin, then locate the two buttons at the lower central area of the instrument panel and hold down the "0.0/Set" button while turning on the ignition. After a moment, release the button and press the button to its left once. This completes the reset of the inspection light successfully.

Posted on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Ibiza (2002-2009 / 6L) Thanks to today's tutorial, we can see how to reset the inspection light on a Seat Ibiza, model 6L produced from 2002 to 2009. The operation is very …
Seat Ibiza (2008-2017 / 6P, 6J) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…
Seat Ibiza (2008-2017 / 6P, 6J) Before starting, sit in the driver's seat of your Seat Ibiza. Begin by activating the instrument cluster by turning the key in the ignition switch. T…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos