Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light on a Seat Ibiza

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

Replace the damaged rear light on a Seat Ibiza if you need to change the bulbs inside it. Open the boot, unscrew the large plastic nut (located above the fabric cover) securing it. Disconnect the rear light from its housing once the nut is removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage).

Refit the light with the associated screws: connect the power connectors before mounting.

Test the correct functioning of the light by turning on the bulbs.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Change the Rear Headlamp Bulb of the Seat Ibiza
How to Change the Rear Headlamp Bulb of the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) In this guide, we will see the main instructions to remove and replace the bulbs of the rear headlamp of the Seat Ibiza. First, open the boot lid and…
How to Replace the Rear Light on a Seat Ibiza
How to Replace the Rear Light on a Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) Before starting, open the tailgate of your Seat Ibiza. Begin by unscrewing and removing the screws that secure the rear light to its housing. By doin…
How to Replace the Rear Light Bulb on a Seat Ibiza?
How to Replace the Rear Light Bulb on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To replace the rear light bulb on a Seat Ibiza, lift the boot to access the screws next to the rear light. Once these screws are loosened, you can co…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos