Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How to remove the Seat Ibiza panel

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6L - Years 2002-2009
Part: Door panel
Operation: How to remove the Seat Ibiza panel

Remove the Ibiza door panel? Easy operation, let's see how to do it. We disassemble the cover of the interior handle, then, we remove the handle itself located above the door panel. We unscrew the tightening screws in it. We unscrew the screws on the sides of the panel. As soon as the panel is free from the screws, let's pull it off with our hands, disconnect the power supply terminals and remove the panel handle. We work inside the door or replace the panel if it is damaged. We fix the cover panel above the door. We assemble all the attached pieces to the cover panel.


Posted on 21 December 2023 by ScegliAuto



How to replace the inside handle of a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Let's start by opening the door of our Seat Ibiza. After that, we will have to disassemble and remove the door panel, unscrewing the fixing screws an
Where is the OBD2 port located in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) If you own a Seat Ibiza and want to find out where the OBD2 port is located for connecting a diagnostic tool, all you have to do is follow the proced
To reset the service light of the Seat Ibiza 2014.
Seat Ibiza (2008-2017 / 6P, 6J) To correctly reset the service light on the instrument panel of your 2014 Seat Ibiza, simply follow these simple steps. First, enter the cabin and re

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos