Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on Seat Ibiza

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Tire pressure warning light

In this video tutorial, you will learn how to reset the tyre pressure warning light on a Seat Ibiza in simple steps. Before performing the reset operation, ensure that any issues related to the pressure variation of one or more tyres have been resolved. Then, get inside the car and turn on the ignition: press the "set" button located on the right side; hold the button until the warning light disappears. If the pressure is within the values set by the manufacturer, the warning light will reset; otherwise, it will remain illuminated.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light of the Seat Ibiza
How to Reset the Tyre Pressure Light of the Seat Ibiza
Seat Ibiza (2017-2026 / 6F, KJ) Today, we will discover how to reset the tyre pressure light of the Seat Ibiza; before resetting the TPMS sensors, ensure all four tyres are at the c…
Resetting the tyre pressure warning light on the Seat Ibiza
Resetting the tyre pressure warning light on the Seat Ibiza
Seat Ibiza (2017-2026 / 6F, KJ) Today, we will go through the instructions for resetting the tyre pressure warning light on the Seat Ibiza; before recalibrating the TPMS sensors, en…
How to Reset the Tyre Warning Light on a Seat Ibiza
How to Reset the Tyre Warning Light on a Seat Ibiza
Seat Ibiza (2017-2026 / 6F, KJ) If you own a latest model Seat Ibiza (2017-2023) and want to learn how to correctly reset the tyre warning light, follow these steps. First, turn on …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos