Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Seat Ibiza?

Model: Seat Ibiza 6L - Years 2002-2009
Part: Service warning light

To reset the Service light on the Seat Ibiza, press and hold the button located on the right side of the instrument cluster, just below the speedometer. While holding it, insert the ignition key into the instrument cluster and turn it to switch on the display. Once the display is on, continue to hold the button until the spanner icon disappears and the maintenance interval is reset. To check that the reset has been successful, simply switch off and then back on the display.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Seat Ibiza?
How to Reset the Service Light on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To reset the Service light on a Seat Ibiza, press and hold the button located on the central right side of the instrument cluster while it is off. Co…
How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…
How to reset the Service light on the Seat Ibiza?
How to reset the Service light on the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) To reset the Service light on the Seat Ibiza, press the button marked "0.0/SET", located at the centre of the dashboard. While holding this button, t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos