Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a 2015 Seat Leon?

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

This video shows and verbally describes the procedure to reset the service light. With the ignition on, press and hold the set button located in the centre between the rev counter and speedometer until the display asks for "reset oil service". At this point, press the set button again; the message "service reset" will appear.

Switch off the ignition, press the set button, and confirm the reset. By pressing the set button once more, you confirm, and the reset is complete.

To ensure the operation was successful, select the setup option from the central dashboard monitor, and under "service", you will notice the new mileage at which the next service should be performed.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Seat Leon 2
How to reset the service light on the Seat Leon 2
Seat Leon (2005-2013 / 1P) To manually reset the service light on your second series Seat Leon, follow the procedure described in this guide. First, get into the car and reach …
How to reset the service light on the Seat Leon
How to reset the service light on the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) To perform the reset of the service light identified by the symbol of the wrench, on a Seat Leon vehicle we must use the diagnostic socket and an ext…
How to Reset the Service Light in a Seat Leon?
How to Reset the Service Light in a Seat Leon?
Seat Leon (2005-2013 / 1P) The procedure to reset the service light in a Seat Leon begins with the vehicle turned off. Looking at the centre of the instrument panel, find a but…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos