Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Ibiza?

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

The need to reset the service light arises when performing the service independently. To reset this light, turn the ignition on and off. Immediately after, press the "Set" button located below the instrument cluster display, holding it for at least five seconds.

While continuing to hold it, turn the key to switch the ignition back on without starting the engine. Release the set button and press the button to its left once.

Turn off the ignition and turn it back on to check if the procedure was successful.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…
How to Reset the Service Light on a 2015 Seat Ibiza?
How to Reset the Service Light on a 2015 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) The procedure to reset the service light on a 2015 Seat Ibiza is very simple and applies to all Seat Ibiza vehicles produced between 2008 and 2017, a…
How to Reset the Service Light on the 2020 Seat Ibiza?
How to Reset the Service Light on the 2020 Seat Ibiza?
Seat Ibiza (2017-2026 / KJ, 6F) In this video tutorial, you will learn how to reset the service light on the 2020 Seat Ibiza. For those opting for a DIY approach, this is certainly …

Other guides you may be interested in

    Frequently Asked Questions

    • Ibiza 2008-2017 - What does the "Insp" light on a Seat Ibiza mean? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos