Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light in the Seat Leon?

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Service warning light

This tutorial shows how to reset the service light in the Seat Leon MK3, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. First, insert the key but leave it in the initial position. Then, press and hold the button marked "0.0/SET" in the centre of the dashboard while simultaneously turning on the ignition. At this point, release the button when the screen changes and press it again to confirm the reset. Restart the vehicle and check that the operation was successful.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Seat Leon?
How to reset the service in the Seat Leon?
Seat Leon (2005-2013 / 1P) In this tutorial, we will see how to reset the service indicator in the Seat Leon, a very simple and quick operation to be performed only after compl…
Reset the service reminder on the Seat Leon.
Reset the service reminder on the Seat Leon.
Seat Leon (2012-2019 / MK 3, 5F) Today's information will show us how to reset the maintenance service reminder for the oil change of the Seat Leon's engine. First, we get into the c…
How to Reset the Service Light on a Seat Leon?
How to Reset the Service Light on a Seat Leon?
Seat Leon (2012-2019 / MK 3, 5F) In this tutorial, you will learn how to reset the service light on a Seat Leon, a very simple and quick operation that should only be performed after…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos