Do it yourself
| ||||
|
Seat Ibiza - Video tutorial
Model: Seat Ibiza
6P, 6J
- Years 2008-2017 The guide shows how to remove the inner panel of the front door of the Seat Ibiza 6j. The first operation to be performed is to remove the finishing plate of the handle using a plastic lever. Unscrew the three fixing screws and remove the inner finishing panel always using a plastic lever. Lower the window until the two anchoring screws of the glass to the movement mechanism are visible. Unscrew the screws slightly and, with a slight pressure towards the upper edge of the door, detach the glass; fix it in position with adhesive tape. Remove the two upper screws of the window lifter and unscrew the two lower screws of the piece. Remove the two fixing screws of the lock positioned on the outside of the door and lift the finishing panel. At this point, it is possible to remove the inner panel of the door.
Posted on 6 July 2023 by ScegliAuto
How to replace the inside handle of a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Let's start by opening the door of our Seat Ibiza. After that, we will have to disassemble and remove the door panel, unscrewing the fixing screws an
Seat Ibiza door panel removal
Seat Ibiza (2002-2009 / 6L) In today's video tutorial we will see how to remove the door panel of a second generation Seat Ibiza. First, let's open the front door and remove all
How to disassemble the front door panel of the Seat Ibiza
Seat Ibiza (1993-2002 / 6K) These short and simple instructions will show us how to disassemble and replace the front door panel of the Seat Ibiza. First of all, we open the fro Other guides that may interest you
|
Fiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |