Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio in the Seat Leon?

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, you will see how to replace the car radio in the Seat Leon, an extremely simple and quick operation. First, ensure the vehicle is turned off, then insert the two specific keys indicated, which can be found online if needed, into the respective slots located just below the display.

Next, carefully pry around the perimeter of the console using a plastic spatula to avoid leaving any marks, then disengage the entire module and pull it out of the dashboard. At this point, disconnect the internal connectors and fit the replacement.


Updated on 12 August 2026 by ScegliAuto


Related tutorials

Can the tyre pressure reset be done in the Seat Leon?
Can the tyre pressure reset be done in the Seat Leon?
Seat Leon (2005-2013 / 1P) Noticing the tyre warning light on a vehicle means there is a specific issue with the inflation pressure, mainly due to a puncture, a flat tyre, or, …
Removing the Radio from Seat Leon
Removing the Radio from Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) How to remove the radio from the Seat Leon? Let’s see how to dismantle the radio and the plastics. Remove the protective trim fixed around the radio …
Where Are the Fuses Located on a Seat Leon?
Where Are the Fuses Located on a Seat Leon?
Seat Leon (2005-2013 / 1P) On the Seat Leon, all fuses are divided between the two fuse boxes installed in the car: the first is located at the bottom left of the steering colu…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos