Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on a Seat Leon

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Service warning light

Thanks to this brief video guide, we can see how to reset the service light, which indicates the oil life remaining, on a Seat Leon produced from 2012 to 2019. First, with the vehicle completely off, press and hold the "0.0/SET" button on the speedometer, then turn on the ignition. This will display a request to perform the reset, so release the button and press it again, holding it for about twenty seconds. Finally, turn off and restart the vehicle to check the reset was successful.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Leon (2005-2013 / 1P) To manually reset the service light of your Seat Leon second series, you must follow the procedure described in our new guide. First of all, enter th…
Seat Leon (2005-2013 / 1P) The procedure to reset the service light in a Seat Leon begins with the vehicle turned off. Looking at the centre of the instrument panel, find a but…
Seat Leon (2005-2013 / 1P) Today we will see how to reset the maintenance service light for the oil change in the Seat Leon. First, get into the car and start by pressing and h…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos