Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Seat Ibiza?

Model: Seat Ibiza 6K - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you can see how to reset the service light on the Seat Ibiza, an extremely simple and quick operation, to be carried out only after completing all the required scheduled maintenance work. First, go inside the cabin, then insert the key but leave it in the first position.

Next, press the button located below the speedometer, simultaneously turn on the instrument cluster, and after about two seconds, turn the same button clockwise. To complete the procedure, simply restart the vehicle.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Seat Ibiza
How to Reset the Service Light on a Seat Ibiza
Seat Ibiza (2017-2026 / KJ, 6F) To completely clear the Service light displayed on the dashboard of the Seat Ibiza, press and hold the button marked "0.0/SET" located at the centre …
How to reset the service light on a Seat Ibiza
How to reset the service light on a Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) In today's video, learn how to reset the service parameter on a Seat Ibiza. First, ensure you perform the maintenance recommended by the manufacturer…
Information on the Fuse Diagram of the Seat Ibiza 6J
Information on the Fuse Diagram of the Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6J, 6P) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos